 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| IL91531 PARALLEL INPUT TONE/PULSE DIALER HIGH-PERFORMANCE SILICON-GATE CMOS The IN91531N provides a 4-bit data input and a handshaking signal to serve as microcomputer interfaces. Under microcomputer control the IN91531N generates both a DTMF signal and a pulse output for telephone dialing. All necessary dual-tone frequencies and dial pulse outputs are derived from the widely used TV crystal standard, providing high accuracy and stability. The required sinusoidal waveform for individual tones is digitally synthesized on the chip, resulting in a waveform with very low total harmonic distortion. * 4-bit parallel data input from microcomputer * TTL compatible inputs and outputs * Uses TV crystal standard (3.58 MHz) to derive all ORDERING INFORMATION frequencies, providing high accuracy and stability IN91531N TA = -10 to 70 C * Operating voltage: 2.5 to 5.5 Volts * Selectable M/B ratio * 10 PPS dial rate * DTMF signaling of digits 0 9, *, #, A, B, C, and D * Pulse signaling of 0 9, *, #, and A * High group tone pre-emphasis: 2 dB * Low total harmonic distortion in DTMF PIN ASSIGNMENT signaling VCC 0.1mk 01 MODE 03 M/B 04 T/P 05 06 D1 07 D2 08 D3 13 CE 02 LATCH 16 VCC DP 14 ACK 15 TONE 09 2.5 - 10k TTL - compatible D0 2.2k 12 OSCI 3.58MHz 11 OSCO GND 10 Korzhenevskogo 12, Minsk, 220064, Republic of Belarus Fax: +375 (17) 278 28 22, Phone: +375 (17) 278 07 11, 277 24 70, 277 24 61, 277 69 16 E-mail: belms@belms.belpak.minsk.by URL: www.bms.by IL91531 DC ELECTRICAL CHARACTERISTICS(V CC=3.5V,FOSC =3.579545MHz, TA = +25C) Guaranteed Limits Symbol VCC VIH VIL IOL1 IOL2 ICC ICCP ICCT IOHACK IOLACK VOR Parameter Operating Voltage High-Level Input Voltage Low-Level Input Voltage Minimum Output Sink Current, DP Maximum Supply Current (Stand-by) Maximum Supply Current (Pulse) Maximum Supply Current (Tone) Minimum Output Current, ACK Source Minimum Output Current, ACK Sink Single Row Tone Output Amplitude Test Conditions Min 2.5 0.8 0 Max 5.5 1 0.2 Unit V VCC VCC mA mA A mA mA mA mA mVp-p VCC =2.5 V, VOL = 0.4V VCC =5.0 V, VOL = 0.4V CE=VCC All outputs unloaded CE=GND All outputs unloaded CE=GND All outputs unloaded VCC = 5.0 V, VOH = 2.4 V VCC = 5.0 V, VOL = 0.4 V VCC = 2.5 V, RL = 2.2 k VCC = 5.5 V, RL = 2.2 k VCC = 2.5 V, RL = 2.2 k VCC = 5.5 V, RL = 2.2 k Symbol Condition 1 3 8 1 1 1.6 4.0 500 1500 500 1600 Guaranteed Limits Min Typ 1/2 2/3 33.3 40 66.6 60 791 763 35 21 70 70 0 5 Max VOC Single Column Tone Output Amplitude mVp-p AC ELECTRICAL CHARACTERISTICS Parameter Unit Make/break Ratio M/B Make Time M/B = VCC M/B = GND M/B = 1/2 ms TM Break Time M/B = 2/3 M/B = 1/2 ms TB Inter-Digit Pause Time M/B = 2/3 M/B = 1/2 ms TIDP Predigit Pause M/B = 2/3 M/B = 1/2 ms TPDP Minimum Tone Duration Minimum Tone Inter-digit Pause Tone Output Pre-digit Pause Oscillator Set-up Time TMFD TTIDP TTPDP TSTART M/B = 2/3 ms ms ms ms Korzhenevskogo 12, Minsk, 220064, Republic of Belarus Fax: +375 (17) 278 28 22, Phone: +375 (17) 278 07 11, 277 24 70, 277 24 61, 277 69 16 E-mail: belms@belms.belpak.minsk.by URL: www.bms.by IL91531 Korzhenevskogo 12, Minsk, 220064, Republic of Belarus Fax: +375 (17) 278 28 22, Phone: +375 (17) 278 07 11, 277 24 70, 277 24 61, 277 69 16 E-mail: belms@belms.belpak.minsk.by URL: www.bms.by |
Price & Availability of IN91531N
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |